As a sub-industry of the paper and pulp industry, the paper processing involves cutting, sorting, coating/printing and wrapping of paper materials. It is the sub-industry taking care of the conversion between the big paper rolls, weighing a few tons, to the sheets that you use in your color printer or the wrapping paper around your gifts. Hammer-IMS provides products for the detection of anomalies during processing: splice/weld detection, paper tear detection/prediction, layer counting and fold detection.
The Marveloc Falcon is the killer in the Marveloc 602 product range. It can handle the following applications: signaling anomalies in paper materials, thickness measurement of synthetic sheets and films, foam characterization, composite thickness measurement and determination of its dielectric parameters, glass thickness measurement, laminated and coated textile basis-weight measuring, glass wool characterization and many more.
Latency reduction technology | Highly responsive, highly precise, high speed
The Marveloc Spider Sprinter is optimized for highly-dynamic industrial environments. It is optimized to detect anomalies in the paper processing industry: splice/weld detection, fold-detection, basic input weight/thickness measurement and even vibration measurement.
Burst mode technology | Ultra high speed, good responsive, minimum precise
The Marveloc Spider is typically applied in a dynamic industrial environment while maintaining sufficient levels of precision, not only enabling detection tasks, but also measurement tasks. It enables detecting anomalies in the paper processing industry: splice/weld detection, fold-detection, basic input weight/thickness measurement and even vibration measurement.
Burst mode technology | High speed, medium responsive, medium precise
These products typically require tailored add-ons that you might need to check.
Products and solutions built upon Hammer-IMS’s measurement systems are connectable through a software suite fitting your inline needs. The software is called Hammer-IMS Connectivity 2.0. It enables an intuitive experience while monitoring your production. It features configuration of all devices that Hammer-IMS provides, real-time measurement visualisation, data-save functionality, calibration routines and various modules for various measurement tasks and materials.
The CURTAIN mechanical mounting frames are O-type or C-type based traveling or fixed measurement frames. They are designed to contain up to 4 sensor-head pairs of the Marveloc 602 product family for inline applications. The frames feature a rigid structure, which does not suffer performance loss due to sensor-head misalignment, which is a typical killer for non-rigid frames. The frames contain an enclosed space for insertion of one Marveloc 602 processing unit. The Marveloc’s wiring can be concealed in dedicated cable conduits. If a traveling frame is requested, it is mounted on a linear-drive unit including a motor drive to enable full coverage of the material’s width. The multi-head nature enables a short mean time between measurement, and small line clearances for broad production lines.