News

The latest news about Hammer-IMS
12 Jun 2023
Maximizing Efficiency and Quality: Hammer-IMS and Bejimac Show Coating Grammage Systems for Latex-backing at ITMA 2023

Our esteemed partner Bejimac, daughter company of Vandewiele nv, is currently showing our cutting-edge measuring systems for coating grammage improvement in finishing lines for woven, tufted and needle-punched carpets.
Hammer-IMS
dedicatedly integrates its non-nuclear technology for measuring coating grammage into Vandewiele-Bejimac finishing lines. Thanks to the real-time measurement and automatic system adaptation of these smart systems, carpet manufacturers maintain highest product quality while reducing the usage and scrap of expensive latex material.
Don't miss the chance to explore our cutting-edge technology at ITMA 2023; be sure to visit Vandewiele and Bejimac's booths. Big thanks to Jean-Loïc Paulus, Managing Director at Bejimac.

01 Jun 2023
Hammer-IMS and Vandewiele complete structural collaboration for coating quality in carpet production

Bilateral international agreement signed for coating grammage improvement in finishing lines for woven, tufted and needle-punched carpets and artificial grass.

Vandewiele's daughter company Bejimac, specialist in textile finishing machines, established a structural collaboration with Hammer-IMS on quality control of latex coating. This agreement fits in the shared vision of Vandewiele, Bejimac and Hammer-IMS to digitalize the finishing lines for carpets in which accurate, adaptive measurement plays an essential role. Hammer-IMS dedicatedly integrates its non-nuclear technology for measuring coating grammage into Vandewiele-Bejimac finishing lines. Thanks to the real-time measurement and automatic system adaptation of these smart systems, carpet manufacturers maintain highest product quality while reducing the usage and scrap of expensive latex material. The collaboration agreement stipulates that Vandewiele sells and distributes its Hammer-IMS enabled finishing lines. This resellership covers the entire world, except EU, the United Kingdom, Norway and Switzerland.


14 Mar 2017
Presenting Hammer-IMS at Limburg & Leuven Innovation Meeting in C-mine

Last month, Hammer-IMS presented itself in C-mine where policy makers from Limburg province discussed with University Leuven the entanglement of Limburg and Leuven on the level of innovation.

19 Oct 2016
On display at K-Messe : Revolutionary non-nuclear measuring alternative for plastics processors

Only eight months after its incorporation and investment capital round, Hammer-IMS exhibits on K-Messe, the world’s premier plastics industry trade fair in Düsseldorf. At this occasion, Hammer-IMS of Flanders demonstrates its new turnkey CURTAIN multi-head solution for measuring thickness and weight in production lines. Co-founders Noël Deferm and Tom Redant of the KU Leuven spin-off company developed a complete portfolio of revolutionary measuring solutions based on ‘M-Rays’ – electromagnetic millimeter waves. The turnkey systems have been performing trial runs at international paper producers and manufacturers of plastic sheets and films, composites and many other materials. Hammer-IMS offers a secure, ecologic and easy-to-install alternative for today’s nuclear measuring equipment. Come and watch the Hammer-IMS system in action on K-Messe – Hall 11 Booth E64.

07 Jul 2016
Hammer-IMS featured in Engineeringnet Magazine in Belgium

(English language) The ambitions of the two engineers-entrepreneurs Noël Deferm and Tom Redant of start-up Hammer-IMS are (rightly) big: '"We want to make our non-nuclear millimeter waves based technology the golden standard in our application domains. The market is ready, because "Europe discourages the use of today's nuclear measuring equipment".

(Dutch language) De ambities van de twee ingenieur-ondernemers Noël Deferm en Tom Redant van start-up Hammer-IMS zijn (terecht) groot: "We willen onze niet-nucleaire millimetergolventechnologie laten evolueren naar de meetstandaard in onze toepassingsgebieden." De markt achten ze rijp, want "Europa stimuleert juridisch de afbouw nucleaire meetsystemen".

engineeringnet.be

24 Jun 2016
Start Hammer-IMS feestelijk ingezet met receptie en gereputeerde sprekers in Hasselt

Corda Campus Hasselt – Op 10 juni ontving Hammer-IMS een 70-tal gasten in de PhiliCorda zaal om de start van de nieuwe spin-off te vieren. Hier ontvouwden Noël Deferm (general manager) en Tom Redant (technical & product manager) hun plannen m.b.t. hun niet-nucleaire Marveloc meettechnologie op basis van millimeter golven. Daarna spraken Professor Patrick Reynaert (KU Leuven), Kurt Hensen (CEO T&M Solutions - nu Averna) en Lieven De Jonge (Head of Smart Manufacturing, LRM) de genodigden toe. Beide oprichters ontwikkelden nieuwe systemen voor het meten van dikte en gewicht in productielijnen, die proefdraaien bij internationale papierproducenten en fabrikanten van plastic platen en folies, composiet, textiel, glaswol en andere materialen.

28 Apr 2016
800.000 euro for Hammer-IMS with non-nuclear measuring alternative for manufacturing industries

Hammer-IMS is a new spin-off from the internationally renowned research laboratory ESAT - MICAS of KU Leuven, and starts off with a capital injection of € 800.000. The investors are Gemma Frisius Fonds KU Leuven and Limburgse Investerings maatschappij (LRM). Both investment institutions gained years of experience in supporting high tech start-ups. After 8 years of research in the university, general manager Noël Deferm and technical & product manager Tom Redant started their company Hammer-IMS. Based on millimeter waves, Deferm and Redant developed new systems voor measuring thickness and weight in production lines. Their revolutionary measuring solutions are performing trial runs at international paper producers and manufacturers of plastic sheets and foils, composites, textile, glass wool and other materials. Hammer-IMS offers a powerful alternative for today’s nuclear measuring equipment, of which the usage is discouraged by the government. In short: performant industrial measuring solutions that are secure, ecologic and easy to install.