Get your samples measured

We care about your products,

and are willing to provide you with a tailored report on our ability to measure them.

Since we care about your products, we are willing to provide you with a tailored report on our ability to measure your products. Sample materials can be sent to our offices in Hasselt, Belgium for analysis. Ensure that the samples' sheet sizes exceed at least an area of 30 cm x 30 cm. Furthermore, it is adviced, in order to get thorough conclusions on the samples, to send a broad range of thicknesses/weights.

Use the following rules of thumb: send at least 5 samples with different weight/thickness. For rigid sheet thickness measurement: try to space the samples at a maximum of 200 micrometers from each other: e.g. 100 micron, 300 micron, 500 micron, 700 micron, 900 micron will be a good choice. For flexible film thickness measurement: try to space the samples at maximum 50 micron from each other. For web and non-woven basis-weight measurement: try to space the samples at a maximum of 200 grams per square meter (gsm) from each other: e.g. 100 gsm, 300 gsm, 500 gsm, 700 gsm, 900 gsm will be a good choice.

Please carefully annotate your samples.

Start measuring the future!

Measure Thickness And Basis-Weight Of Web Materials the new way...
Contact »